Why Did My Quartz Watch Stop? Common Causes and Easy Fixes

Nothing is more upsetting than glancing at your wrist and discovering that your quartz watch has stopped. Whether you own a Wishdoit watch or another trusted brand, understanding the reasons why quartz watches fail and how to fix them can save you time and money. Here’s a breakdown of some common reasons for failure, along with simple solutions to get your quartz watch running again.

1. Dead Battery (The Most Likely Culprit)

Signs:

• The seconds hand moves in 2-4 second jumps or stops entirely

• No response when pressing buttons (on chronographs)

Fix:
✔ Replace the battery with a fresh, high-quality cell
✔ For watches, consider contacting a watch repair shop to ensure the battery is well sealed

Prevention:

• Replace the battery every 2-3 years, even if the watch is still running

• Note the battery replacement date inside the case back

2. Battery Contact Issues

Signs:

• Intermittent operation (works when pressed, then stops)

• Visible corrosion on the battery contacts

Fix:

1. Remove the battery

2. Clean contacts with a cotton swab dipped in rubbing alcohol

3. Gently bend the contact spring to ensure proper pressure

3. Magnetization

Signs:

• Sudden timekeeping inaccuracies before stopping

• Seconds hand stuttering or sticking

Fix:

• Demagnetize using a professional tool (or visit a Wishdoit service center)

• Keep away from phones, speakers, and magnetic clasps

4. Circuit Damage

Signs:

• No response after battery replacement

• Burnt smell or visible damage on the circuit

Possible Causes:

• Battery leakage

• Water ingress

• Electrical surge

Solution:

• Need to go to Wishdoit Watch Repair Center for professional repair

5. Hands Obstruction

Signs:

• Ticking sound but no hand movement

• Visible misalignment of hands

Fix:

1. Gently tap the case to dislodge stuck hands

2. If persistent, professional realignment is needed

Prevention:

• Avoid impacts and rough handling

• Store your watch properly when not in use

6. Gear Train Issues

Signs:

• Intermittent operation

• Jerky hand movement

Causes:

• Dirt or dried lubricant in the movement

• Worn gears

Solution:

• Requires cleaning and servicing by a professional

When to go to a watch service center

Seek professional help if:

• The watch stops again soon after battery replacement

• You see signs of water damage or corrosion

• The circuit board appears damaged

• Hands are physically misaligned

Benefits of Official Service:
✔ Genuine Wishdoit replacement parts
✔ Warranty protection

Extend Your Quartz Watch’s Life

✅ Replace batteries proactively
✅ Avoid extreme temperatures
✅ Clean contacts during battery changes
✅ Store properly (away from magnets and moisture)

Why Choose Wishdoit Quartz Watches?

• Precision-tuned movements for exceptional accuracy

• Quality batteries that last longer

• Robust construction to resist common failures

• Reliable service worldwide

Conclusions

Most quartz watch problems have simple solutions. Once you understand these common problems, you can usually fix your watch yourself. For persistent problems, remember that you can ask the service center where you purchased the watch to fix the problem for you.

You'll also like 

Hands-On Wishdoit Releases An Upgrade Watch In The New way

Do you know what a table mirror is？

Mechanical vs. Quartz Watches: Which One Should You Choose?